Absolutely! Here’s a helpful and practical article based on your prompt:

🌀 My Washing Machine Is Making Loud Noises and Shaking Like Crazy!

Do This Before Calling a Repairman

We’ve all been there — you’re doing laundry, and suddenly your washing machine starts sounding like it’s preparing for liftoff. Loud banging, intense shaking, and a full-on wobble across the laundry room floor. It’s alarming, disruptive, and can even damage your appliance (or your floor).

But before you pick up the phone to call a repair technician (and spend $$$), try these simple DIY checks and fixes — you might be able to solve the problem yourself in under 10 minutes.

🔧 First, Why Is This Happening?

Loud noises and extreme shaking during the spin cycle are often caused by:

• An unbalanced load
• Machine not level
• Loose parts or shipping bolts
• Worn-out shock absorbers or drum bearings

Good news? Most of these are easy to fix at home, especially if your washer is still relatively new.

✅ Step-by-Step: What to Check Before You Call a Repairman

1. 🧺 Check the Load Balance

Cause: A common culprit. Towels on one side, nothing on the other? Boom — unbalanced drum.

Fix:

• Stop the cycle and redistribute the clothes evenly in the drum.
• Wash bulky items like blankets or rugs with a few towels to balance the weight.
• Avoid overloading or underloading the washer.

🟡 Tip: Most modern washers have sensors to detect imbalance, but they’re not foolproof — manual balance still matters.

2. 🧱 Make Sure the Washer Is Level

Cause: If the washer isn’t sitting flat, it’ll shake violently during high-speed spins.

Fix:

• Use a spirit level (or a leveling app on your phone) to check if the washer is even on all sides.
• Adjust the feet underneath — most washers have twistable leveling legs.
• Place the machine on a vibration-absorbing pad or mat to reduce movement.

🟡 Tip: Uneven floors are sneaky. Always level the washer based on the floor it’s on, not just visually.

3. 🛠️ Look for Leftover Shipping Bolts (If It’s New)

Cause: New washers come with shipping bolts in the back to secure the drum during transport. If these aren’t removed, your washer will jump around like crazy.

Fix:

• Unplug the washer.
• Check the back panel for any metal rods or bolts.
• Remove them using a wrench or socket tool (refer to the user manual).

⚠️ Don’t skip this! Running a washer with shipping bolts still installed can permanently damage the machine.

4. 📦 Check for Loose or Worn Parts

Cause: Over time, parts like drum bearings, shock absorbers, or suspension rods can wear out.

Fix:

• Tilt the washer slightly and look underneath for any loose springs or shocks.
• Listen for grinding or knocking — this could mean bearing issues, which do need a professional.

🟡 DIY-friendly: Replacing shock absorbers or suspension rods can be done at home if you’re handy — parts are often under $30 online.

Next→