If your kettle breaks, don’t rush to throw it away. I’ll show you how to fix it in 1 minute (note to men)

**How to Fix Your Broken Kettle in 1 Minute: A Handy Guide (Yes, Even for Men!)**

When your kettle breaks, the first instinct might be to toss it out and buy a new one. But hold on—what if you could fix it in just one minute? Not only will this save you money, but it’s also an environmentally friendly solution. Here’s a quick guide to troubleshooting and fixing common kettle issues, no tools or expertise required.

—

### **Common Kettle Problems and Quick Fixes**

#### **1. The Kettle Won’t Turn On**
This is one of the most frequent issues. Here’s how to troubleshoot:
– **Check the Plug and Outlet:** Ensure the kettle is firmly plugged in, and test the outlet with another appliance.
– **Inspect the Power Switch:** Sometimes, the switch gets stuck. Try flipping it a few times to see if it engages.

#### **2. The Kettle Isn’t Heating Properly**
If the kettle turns on but doesn’t heat up, the culprit is often a **limescale build-up** on the heating element. Here’s how to fix it:
– **Quick Descaling Method:**
– Fill the kettle halfway with a mixture of equal parts water and white vinegar.
– Boil the mixture, then let it sit for 10 minutes.
– Rinse thoroughly, and it should heat up as good as new.

**3. Loose or Damaged Cord**
A frayed or loose cord might seem like the end of your kettle, but here’s a quick test:
– **Test the Connection:** Jiggle the cord gently while the kettle is plugged in (ensure safety by using a wooden stick, not your hands). If the kettle powers on, the cord is the issue.
– **Temporary Fix:** Secure the cord in place with tape until you can replace it.

For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends